Main Menu Vehicle Trails Mechanicals TJ/LJ Mods JK Mods Gallery
Rugged Ridge Winch Pull Strap

Rugged Ridge Winch Pull Strap

Part #:

Was just spending the day looking at stuff when I chanced across a Rugged Ridge Winch Pull Strap still in it's box at a garage sale. A couple bucks later it was headed home with me. I don't think this was ever used, it was still in the plastic untouched. I had seen some other pulls that were basically a strap with a loop at one end, not much to grab onto, but this one looks a lot better with the handle on the end.

Additional Parts:

Tools Needed:

 

Here's the box.
Here's the pull strap. Fairly simple in design. It does have a really nice handle to wrap your hand around and pull the winch cable out with. Operation is fairly simple with hooking the small loop over the winch cable, grabbing the handle and pulling. Okay, now go back and flip the winch to freespool. You know you've done that.

 

 


  N-m Ft. Lbs. In. Lbs.
       
       

This page last updated: 15-Jul-2013

Content and Design © 2002-present WanderingTrail,  Ronald Seegert
Common Sense and Safety should always be observed when working on your vehicle or doing modifications. Jackstands, wheel blocks, disconnecting the battery are a few of the basic safety precautions that should be used and may not be mentioned in the write ups on this site. You are responsible for your own installation, these write ups are a helpful guideline and should not be taken as an official installation instruction. My write up may be different from the kits currently out there, so alwasy double check the manufacturers installation instructions when installing anything. I try to keep the site up to date with changes that have occured as I discover them, but may not have the latest unless someone lets me know. If you feel that an install is above your capabilities after reading my write ups, I recommend getting together with a club and getting some help. Only a few times have I needed to employe some actual help from a shop to get something done. Usually welding or A/C work. While I have spent many years working on mechanical systems, I am not an expert, nor do I pretend to be one. I hope these write ups have been useful to you.
All trademarked names & logos are property of their respective owners
This site is in no way associated with FCA.
Jeep is a registered trademark of FCA.