Main Menu Vehicle Trails Mechanicals TJ/LJ Mods JK Mods Gallery
Cowl Removal

Cowl Removal

Part #:

One day I got curious as to how much room was under the cowl on the new Jeep Wrangler JK's, so out came the tools.

Additional Parts:

Tools Needed:
T30 Torx
13 mm socket
Ratchet
Flat blade screwdriver
Needle nose pliers

 

1. Remove the two torx bolts from either side of the cowl with a T30 torx.
2. Remove the 4 push connectors that hold the cowl to the screen underneath. Use a cloth to protect the paint when you remove these. I used a flat blade screwdriver and a needle nose pliers to get these out.
3. Lift up the plastic cover on the windshield wiper arms to expose the nut holding the wiper arm to the shaft. Remove the nut with a 13 mm socket. Don't lose the nut. Remove the wiper arms.
This is what it looks like underneath. Plenty of room to mount some small stuff over on the passenger side.
 

 

 


  N-m Ft. Lbs. In. Lbs.
       
       

This page last updated: 01-Mar-2011

Content and Design © 2002-present WanderingTrail,  Ronald Seegert
Common Sense and Safety should always be observed when working on your vehicle or doing modifications. Jackstands, wheel blocks, disconnecting the battery are a few of the basic safety precautions that should be used and may not be mentioned in the write ups on this site. You are responsible for your own installation, these write ups are a helpful guideline and should not be taken as an official installation instruction. My write up may be different from the kits currently out there, so alwasy double check the manufacturers installation instructions when installing anything. I try to keep the site up to date with changes that have occured as I discover them, but may not have the latest unless someone lets me know. If you feel that an install is above your capabilities after reading my write ups, I recommend getting together with a club and getting some help. Only a few times have I needed to employe some actual help from a shop to get something done. Usually welding or A/C work. While I have spent many years working on mechanical systems, I am not an expert, nor do I pretend to be one. I hope these write ups have been useful to you.
All trademarked names & logos are property of their respective owners
This site is in no way associated with FCA.
Jeep is a registered trademark of FCA.